Cavitron Prophy Jet Air Polishing System Tips

Cavitron Prophy Jet Air Polishing System Tips:

Instructions For Use:

1.The blast pot and cover:
A)will turn on the lid, pour in the tank blasting powder to below the green line (no more than 1/3 of the height of the can) and
then tighten lids
B) Do not over-blasting powder 1/2 tank height, so as to avoid congestion
C) the inside of the lid with the filter, take care that it can not deform
2.Drain: Before each use, press the button three times to drain gas emission filter cup gouache, powder drier.
3. Air value: clockwise adjustment
4. Water value: according to the actual work needs to be adjusted
5. blasting switch:
A)the blasting switch according to the "ON" position, the foot switch blasting powder ejected from the nozzle handle; "OFF" to
close blast switch
B) After each use, pull the blasting switch to "OFF" position, then step on the foot switch several times, the purpose is to purge
the pipe more than powder, to avoid clogging when using the next
6. Main Connector:After high or low discharge screw connected to the host machine's four-hole joints treatment

Package list:

• Control box × 1

• Handle cable × 1

• Handle × 1

• Nozzle × 2

• O-ring × 6

• Cleaning brush × 1

• Seal gasket × 2

• Cover × 1

• Needle × 2

• Instruction manual × 1

Our patens: